Ripmax - Chris Foss Wots Wot Foam-E ARF

Wots-Wot-Foam-E

New

Wots Wot Foam-E

More details

1 Item

By buying this product you can collect up to 168 loyalty points. Your cart will total 168 points that can be converted into a voucher of R33.60.


R3,360.00

More info

The Wots Wot Foam-E makes for a perfect all round sports foam aircraft. The Wots Wot Foam-E combines the slow speed characteristics of the Wot4 Foam-E and the precision and 'locked in feel' of the Acrowot Foam-E. The Wots Wot Foam-E has been specifically designed to suit a popular 3S 2200mAh Li-Po battery resulting in a model that will fit in a hatchback car boot fully assembled! For a little more flight time, try the Hi-Energy 2700mAh pack instead.

The power system consists of a higher power 920kv outrunner brushless motor with 40A brushless ESC that really packs a punch giving the airframe over 1:1 power to weight ratio! Using a popular 2200mAh battery the duration is approximately 8 minutes.

Supplied in RX ready format the four 9 gram micro servos, outrunner brushless motor and 40A ESC come pre-installed ready to connect up to your choice of receiver and li-Po battery.

Using the latest in foam moulding technology you will notice the edges are very crisp and sharp without the weight penalty of a denser foam. The control surfaces use 'live' style moulded foam hinges but they also have plastic hinges moulded into the foam for extra security.

Assembly is easy and requires only a cross head screwdriver. It's so quick it takes longer to fit the decals than to assemble the airframe!

In the air, biplanes are associated with slow scale flight but not the WotsWot, thanks to four large ailerons the roll rate is fast and authoritative and the short moment of the design gives great elevator and rudder power. The Wots Wot really excels during slow speed flight and can be really docile with low rates on. Up the rates and open the throttle for flicks, spins and knife edge loops and more! The stall is benign and thanks to the biplane configuration it really slows down nicely for landing.

• Foam Hinge Line with Plastic Hinges Moulded-In
• Crisp & Precise Foam Mouldings
• Carbon Re-Inforced Internal Structure
• Easy Wing Assembly
• Removable Tail Wheel
• Tough Aluminium Undercarriage
• Large Colourful Decal Sheet                                



Basic Information

Brand:Chris Foss

Scale: N/A

Type: Bi-Plane

    Transmitter      

Frequency N/A

Channels: 4 Min (REQ)

Type: N/A

Battery: N/A



Power System

Motor: Brushed

ESC: Brushed

Dimensions

Length: 945mm

Width: 1000mm

Battery

Type: LiPO (REQ)

Cell: 3S

Voltage: 11.1vV

Capacity:   2200Mah

Run Time: +-8-10mins

Weight

Weight: +-1180g (Excluding Battery)

Package Includes

1x Fuselage
2x Wings
1x Tailplane
1x Fin
1x Undercarriage
1x Wing Struts
1x Fastners & Accessories
1x Propeller with Spinner
1x Decal Kit

Please see manual for additional information.

Reviews

Accessories

Download